Press Release FeedGet the RSS feed
Menu

Newswire.com

Vadzo Imaging Validates Low Power Performance on Falcon-830CRS: Onsemi HyperLux LP AR0830 8MP Color USB Camera for Power Efficient Embedded Vision

onsemi

The Falcon-830CRS is an 8MP Color USB Camera built on the Onsemi HyperLux LP AR0830 sensor, and Vadzo has validated its super-low-power performance for power-efficient embedded vision. Battery-powered and always-on devices cannot afford a camera that streams all day to catch a few seconds of activity. They need a module that idles at very low power, wakes when something moves, and then captures a frame that holds detail in both bright and dark regions. As a 4K Super Low Power USB Camera, the Falcon-830CRS combines a super low power mode with wake on motion, and two dynamic range modes, line interleaved HDR and enhanced dynamic range, for scenes of different contrast. Auto exposure and auto white balance keep the picture usable from the first frame. As an 8MP Low Power USB Camera and a 4K Color USB 3.2 Gen 1 Camera, it connects over a standard cable. Designed for smart security, retail in-store, kiosk, and drone systems, the module helps designers spend power only when there is something to see.

  1. SaaSVadzo Imaging Validates Bolt-234CGS Camera Compatibility with NVIDIA Jetson AGX Orin: Onsemi AR0234 2MP Color MIPI CSI-2 Camera with Global Shutter and Onboard ISPCompanies: NvidiaonsemiThe Bolt-234CGS is a 2MP Color MIPI CSI-2 Camera built on the Onsemi AR0234 sensor, and Vadzo has validated its compatibility with NVIDIA Jetson AGX Orin. Jetson AGX Orin is a platform for multi-camera robots, retail systems, and surveillance nodes, and the camera modules attached to it decide how well that compute is used. Two choices matter most. A global shutter exposes every pixel at the same instant, so a moving robot, a passing shopper, or a vehicle appears undistorted. An on-board image signal processor finishes the image inside the module, so the Jetson receives a processed YUV image and its own ISP does not need to be tuned for the sensor. As a 2MP Global Shutter MIPI Camera and a 2MP AGX Orin MIPI Camera, the Bolt-234CGS delivers Full HD at up to 60 frames per second, with auto exposure and auto white balance applied in the module. Designed for warehouse robotics, smart surveillance, and retail analytics and automation, it gives AGX Orin systems consistent color and distortion-free frames.
  2. RetailVadzo Imaging Validates Bolt-544CRS 5MP Onsemi HyperLux LP AR0544 Color MIPI CSI-2 Camera on Rockchip RV1126 for Embedded Vision ApplicationsCompanies: onsemiThe Bolt-544CRS is a 5MP low-power MIPI Camera built on the Onsemi HyperLux LP AR0544 sensor, and Vadzo has validated it on the Rockchip RV1126 for embedded vision applications. The RV1126 is a favorite for compact smart camera products because it combines an image signal processor, a neural processing unit, and a video encoder in a low-power chip, and the camera attached to it decides how much of that efficiency survives in the finished device. The Bolt-544CRS pairs wake-on-motion with low power consumption, so a device can sleep through quiet hours and wake only when something moves. Line interleaved HDR (LI-HDR) and enhanced dynamic range (eDR) modes handle scenes that mix bright and dark regions, and auto exposure and auto white balance keep the image consistent. As a 5MP Wake-on-Motion MIPI Camera, a Low Power Embedded MIPI Camera, and an RV1126 5MP Camera, it connects through standard MIPI CSI-2. Designed for automation and robotics, smart security, retail automation, telematics, and kiosk devices, it gives low-power designs a color image with 5MP of detail.
  3. SemiconductorsPower Transistors - Global Strategic Business Report: Capitalize on the US$21.4B Market by 2032 as Infineon, Fuji Electric, ON Semiconductor, Mitsubishi Electric and Toshiba Disrupt Power SystemsCompanies: onsemiMitsubishi ElectricTarget SiC and GaN innovation, EVs, renewables, IoT and smart grids to capture demand for efficient, reliable power management.
  4. HealthcareVadzo Imaging Validates Low Noise Imaging on Bolt-521CRS: Onsemi AR0521 5MP Color MIPI CSI-2 Camera with RK3588 Rockchip ProcessorCompanies: onsemiThe Bolt-521CRS is a 5MP Color MIPI CSI-2 Camera built on the Onsemi AR0521 sensor, and Vadzo has validated its low-noise imaging on the RK3588 Rockchip processor. Noise decides how useful an embedded image is. It hides detail in dim scenes, confuses detection models, and inflates the bitrate of recorded video. Where that noise gets controlled matters as much as how much of it there is, because a raw sensor module leaves denoising, color processing, and tuning to the host, and the result depends on how well the host was tuned. The Bolt-521CRS takes a different route. Large 2.2-micron pixels gather more light, and an on-board image signal processor applies denoising, color correction, and auto exposure inside the module, so the host receives a finished YUV image. As a Low Noise Embedded Camera, it delivers Full HD at up to 60 frames per second and 5MP at up to 30 frames per second. Designed for smart surveillance, warehouse robotics, and medical and life science devices, this RK3588 Compatible MIPI Camera gives embedded teams a clean, consistent image on Rockchip, Raspberry Pi, and NVIDIA platforms.
  5. Financeonsemi and Synaptics Announce Revised Merger AgreementCompanies: onsemiRevised Terms to Deliver Higher onsemi Shareholder Value through Immediate EPS Accretion