Press Release FeedGet the RSS feed
Menu

ACCESS Newswire

Vadzo Imaging Positions Bolt-521CRS: Onsemi AR0521 Color 5MP Low-Noise MIPI Camera with NVIDIA Jetson AGX Orin for Medical and Life Science Imaging

onsemi

The Bolt-521CRS is a 5MP Low-Noise MIPI Camera built on the Onsemi AR0521 sensor, and Vadzo is positioning it with NVIDIA Jetson AGX Orin for medical and life science imaging. Medical and laboratory instruments image small, dim, and often strobe lit subjects, and they depend on clean color and consistent exposure. The Bolt-521CRS pairs large 2.2 micron pixels with an on board ISP, so the frame arrives with low noise and finished color. Its sensor also supports Global Reset Release, a mode that starts exposure on every row at the same moment, which lets a rolling shutter sensor work with a flash or a controlled light source and avoids much of the usual skew. The module supports NVIDIA Jetson Orin Nano, Orin NX, and AGX Orin through 2 lane and 4 lane adapter boards. Designed for instrument makers building microscopes, ophthalmic and intraoral devices, and laboratory systems, this 5MP Jetson AGX Orin MIPI Camera and 5MP GRR MIPI Camera supplies clean, correctly colored images to the Jetson platform of their choice.

IRVINE, CA / October 23, 2026 / Vadzo Imaging, a provider of embedded vision camera products for OEMs and system integrators, today positions the Bolt-521CRS as a 5MP Low-Noise MIPI Camera with NVIDIA Jetson AGX Orin for medical and life science imaging. Built on the Onsemi AR0521 sensor and part of Vadzo's MIPI camera portfolio, the Bolt-521CRS combines low noise imaging, Global Reset Release, an on board ISP, and two adapter board variants, and it supports NVIDIA Jetson Orin Nano, Orin NX, and AGX Orin. With this positioning, Vadzo presents a 5MP Jetson AGX Orin MIPI Camera for digital microscopes, ophthalmic and intraoral devices, and laboratory instruments, together with guidance on how Global Reset Release works, where its limits lie, and how to choose among the Orin modules.

Why a 5MP Low-Noise MIPI Camera Is Suited for Medical and Life Science Imaging

Medical and life science instruments ask a lot of a camera. The subjects are small and often dim, such as tissue, cells, and the surface of an eye or a tooth. Illumination is usually controlled by the instrument, and it is frequently pulsed, because a short flash freezes motion, limits heating of a sample, and reduces exposure of a patient. The images must be clean and correctly colored, since a reviewer judges what is seen, and they must be consistent from one capture to the next so that comparisons mean something. A camera that drifts from one session to the next undermines that trust.

  1. SaaSVadzo Imaging Positions Bolt-521CRS: Onsemi AR0521 Color 5MP Low-Noise MIPI Camera with NVIDIA Jetson AGX Orin for Medical and Life Science ImagingCompanies: onsemiNvidiaThe Bolt-521CRS is a 5MP Low-Noise MIPI Camera built on the Onsemi AR0521 sensor, and Vadzo is positioning it with NVIDIA Jetson AGX Orin for medical and life science imaging. Medical and laboratory instruments image small, dim, and often strobe lit subjects, and they depend on clean color and consistent exposure. The Bolt-521CRS pairs large 2.2 micron pixels with an on board ISP, so the frame arrives with low noise and finished color. Its sensor also supports Global Reset Release, a mode that starts exposure on every row at the same moment, which lets a rolling shutter sensor work with a flash or a controlled light source and avoids much of the usual skew. The module supports NVIDIA Jetson Orin Nano, Orin NX, and AGX Orin through 2 lane and 4 lane adapter boards. Designed for instrument makers building microscopes, ophthalmic and intraoral devices, and laboratory systems, this 5MP Jetson AGX Orin MIPI Camera and 5MP GRR MIPI Camera supplies clean, correctly colored images to the Jetson platform of their choice.
  2. Software & ITVadzo Imaging Positions Falcon-234CGH: 2MP Onsemi AR0234 Color Global Shutter Autofocus USB Camera for Accurate Barcode Reading in Kiosks and Digital Signage SystemsCompanies: onsemiThe Falcon-234CGH is a 2MP onsemi AR0234 Color Global Shutter Autofocus USB Camera, and Vadzo is positioning it for accurate barcode reading in kiosks and digital signage systems. A barcode reader fails for simple reasons. The code is out of focus; it blurs because the user's hand or phone is moving, it is washed out by glare from a phone screen, or it covers too few pixels to decode. The Falcon-234CGH addresses each one. A voice coil motor autofocus lens brings the code into focus at whatever distance the user holds it, a global shutter freezes motion without skew, and an on-board ISP applies auto exposure, auto white balance, and denoising before the frame leaves the camera. The lens is a 74 DFOV S-Mount design, and the module connects over USB 3.2 Gen1 with UVC compliance. Designed for kiosk and digital signage makers, this 2MP Color Global Shutter Autofocus USB Camera supplies sharp, correctly exposed frames to the decoding software, and it reads both printed codes and codes on phone screens.
  3. Vadzo Imaging Positions Falcon-234CGH: 2MP Onsemi AR0234 Color Global Shutter Autofocus USB Camera for Accurate Barcode Reading in Kiosks and Digital Signage SystemsCompanies: onsemiThe Falcon-234CGH is a 2MP onsemi AR0234 Color Global Shutter Autofocus USB Camera , and Vadzo is positioning it for accurate barcode reading in kiosks and digital signage systems. A barcode reader fails for simple reasons. The code is out of focus; it blurs because the user's hand or phone is moving, it is washed out by
  4. MediaVadzo Imaging Positions Innova-234CGE: Onsemi AR0234 2MP Color Global Shutter GigE Camera for Reliable Day and Night Video RecordingCompanies: onsemiThe Innova-234CGE is a 2MP Color GigE Camera built on the Onsemi AR0234 sensor, and Vadzo is positioning it for reliable day and night video recording. Recording that never stops asks more of a camera than a good picture. The stream must stay up for months, the bitrate must fit the network and the storage, the image must
  5. HealthcareVadzo Imaging Positions Innova-234CGE: Onsemi AR0234 2MP Color Global Shutter GigE Camera for Reliable Day and Night Video RecordingCompanies: onsemiThe Innova-234CGE is a 2MP Color GigE Camera built on the Onsemi AR0234 sensor, and Vadzo is positioning it for reliable day and night video recording. Recording that never stops asks more of a camera than a good picture. The stream must stay up for months, the bitrate must fit the network and the storage, the image must stay usable as daylight fades, and installation must be simple enough to repeat across many positions. As a 2MP Day Night GigE Camera and a 2MP Color Day Night GigE Camera, the Innova-234CGE answers those needs with a global shutter, an on-board ISP, ONVIF compliance, and PTP synchronization. It streams 1080p, 720p, and VGA at up to 60 frames per second, and it carries video, control, and power over a single Ethernet cable. Designed for smart surveillance, patient monitoring, and mobile robot systems, it gives integrators a color GigE camera that is built to keep recording.
  6. Vadzo Imaging Positions Falcon-521CRS: Onsemi AR0521 Color USB 3.2 Gen1 Camera with Low Noise Imaging for Pedestrian Safety SurveillanceCompanies: onsemiThe Falcon-521CRS is an AR0521 Color USB 3.2 Gen 1 Camera built on the Onsemi AR0521 sensor, and Vadzo is positioning it for pedestrian safety surveillance. Watching a crosswalk is harder than it looks. People cross at dusk and in the dark, headlights sweep across the scene, street lamps create bright spots, and the pedes